Comlink Communicator STL Files

Stormtrooper or Shadow Trooper L

Comlink Communicator STL Files


STL Files to 3D print your own Comlink Communicator.

Designed by me in Fusion 360 and includes a Blet Clip Holder and Display Stand

This is a static prop and has NOT been designed to hold any electronics.


Replica of Comlink Communicator from Star Wars:

Can be fitted with real stainless steel mesh.

Please Note: Parts will require sanding and painting to finish.

Remember to allow room when fitting together for the thickness of the paint.


To achieve a high quality finish on the prop if printing using a FDM printer, these are the steps needed.

  1. Sand using 800 grit sandpaper for the first sanding.
  2. Sand using 240 grit sandpaper for the for a smoother finish.
  3. Fill any joints, seams or print lines using a good quality filler - (Optional)
  4. Sand using 240 grit sandpaper again and check for blemishes.
  5. Repeat steps 3 and 4 if necessary.
  6. Sand using 600 grit wet and dry sandpaper.
  7. Finish off with a good sand using 1200 grit wet and dry sandpaper


  1. Paint with filler primer.
  2. Check for any blemishes and fill if necessary
  3. Sand using either 600 or 1200 grit wet and dry sandpaper.
  4. Prime with a few coats.
  5. Final sand using 1200 grit wet and dry sandpaper.
  6. Finally paint in the desired colour with a few this coats.
  7. Weathering is optional.

This is a time consuming process, but the more preparation you do the better the final finish and end result.


This Item is a digital download of the STL files in Zipped format:

Log into your account to access your downloads.

1 x Comlink Communicator STL Files


Please Note: A 3D Printer is required to print these files.

Before placing your order, please make sure you are fully aware of the shipping policy outlined here: Shipping Policy


Write a review

Please login or register to review

  • Brand: PropTroniX
  • Product Code:PT0129
  • Availability:97

  • { price }}

Related Products