Self Build BLTroniX Blaster Electronics Kit

Self Build BLTroniX Blaster Electronics Kit

This is a self build electronics kit for either the E-11 or F-11D Star Wars Blasters

The kit comprises the following components.

BLTroniX PCB Board with all resistors pre-soldered - Choose between E-11 and F-11D

Arduino Nano Micro Controller pre-programmed with my BLTroniX Blaster code - E-11 or F-11D

DFPlayer Mini MP3 Player 

2GB/4GB Micro SD-Card

PAM8403 Amplifier

28mm 2W 8Ohm 28mm Speaker - 2nd Speaker is optional

0.91" OLED Display

5 x Button Switches

     1. Trigger (Micro Lever Switch)

     2. Weapon Select (12x12mm Momentary Tactile Switch

     3. Weapon Reload (Micro Tactile Switch or 6x6mm Tactile Switch) 

     4. Laser On/Off (6x6mm  Tactile Switch)

     5. Flashlight On/Off - F-11D Only (6x6mm  Tactile Switch)

     5. Magazine Detection - E-11 Only (Magnetic Reed Switch)

5V Red LED Laser Diode - E-11 Kit Only

White Piranha LED - F-11D Kit Only

Single WS2812B LED (Fire LED)
WS2912B Barrel LED Strips - Strip of 24 LED's for the E-11 and 2 Strips x 33 LED's for the F-11D

1 x 4 Pin JST PH Lead - OLED Display

1 x 3 Pin JST PH Lead - LED Strip
9 x 2 Pin JST PH Leads - E-11 PCB - Trigger Switch, Weapon Reload Switch, Weapon Select Switch, Laser On/Off Switch, Battery, 2 x Speakers, Magazine Detection Switch & Laser LED.

10 x 2 Pin JST PH Leads - F-11D PCB - Trigger Switch, Weapon Reload Switch, Weapon Select Switch, Laser On/Off Switch, Flashlight On/Off Switch, Battery, 2 x Speakers, Flashlight LED & Laser LED.

2 x 8 Pin Female Headers (DFPlayer Mini) - Optional - Component can be soldered directly to the PCB to save space

3 x 2 Pin Female Headers  (PAM8403) - Optional - Component can be soldered directly to the PCB to save space

1 x 3 Pin Female Headers  (PAM8403) - Optional - Component can be soldered directly to the PCB to save space

2 x 15 Pin Female Headers  (Arduino Nano) - Optional

5 x 10K Ω Resistors - For the Switches - Not needed if using the BLTroniX PCB

1K Ω Resistor - For the DFPlayer Mini - Not needed if using the BLTroniX PCB

TP4056 Battery Charge Board


Please Note: The kit does NOT include a battery. I recommend using a 3.7V 18650 battery, These are readily available on eBay and Amazon.


Options:

E-11 Blaster PCB Board

F-11D Blaster PCB Board


Kit without the PCB Board but will include the resistors needed in the kit - (This kit is ideal if you wish to install the main components in different parts of your blaster)


Very Important Notice

The screen printing on the PCB for the battery connector has been reversed - so the + is Negative and the - is Positive. The boards do come with a sticker on these pads to warn you, so please remember this when wiring up your PCB.


Package Includes:

1 x Self Build Blaster Electronics Kit - With or without the BLTroniX PCB Board.



Please Note: DIY electronics are meant for those with basic electrical knowledge and soldering skills. DIY electronics do not include lead wires, instructions or warranties.

Before placing your ordering, please make sure you are fully aware of the shipping policy outlined here: Shipping Policy

Write a review

Please login or register to review

  • Product Code:GE00135
  • Availability:1

  • { price }}


Available Options